Flexx Handlebars

$359.95
SKU: FB001

See the sizing chart below to determine the Flexx handlebar bend and width that you want, then type that part # in the order box at the bottom of this page.  The stock KTM bar bend is equivalent to the FL-1001-10-31 part # bar.  Please note, Flexx handlebars could take 2-3 weeks to ship.

The Flexx Handlebar System is designed to absorb shock and vibration that is transferred to your hands, arms, elbows and shoulders.

  • Dramatically reduces vibration due to the aluminum (material of the handlebar) to rubber (elastomer) interference.
  • The absorbing action of the Flexx Handlebar results in less abuse transferred to the rider, depleting arm pump and fatigue.
  • By articulating only in the same plane as the suspension the Flexx System absorbs square edge bumps, rocks, whoops, g-outs and hard landings without sacrificing control.
  • Tunable elastomers absorb abuse typically transferred to your upper body.

 BONUS! Order any set of Flexx Handlebars TODAY and receive TWO FREE DVDs! 

 
 Flexx Handlebar System Bends
 
See Legend below for chart codes
10 Degree Bends A B C D Part Number
10° MOTO - 2008 KTM SXF 10° 40 32 92 FL-1001-10-32
10° MOTO Dpr X-BARS 10° 40 32 92 FL-1001-10-32SD
10° ENDURO 10° 40 31 92 FL-1001-10-31
10° ENDURO Dpr X-BARS 10° 40 31 92 FL-1001-10-31SD
10° ENDURO HI 10° 40 31 116 FL-1003-10-31
10° MOTO HI 10° 40 32 116 FL-1003-10-32
10° MOTO HI Dpr X-BARS 10° 40 32 116 FL-1003-10-32SD
10° MINI HI 10° 40 29 116 FL-1002-10-29
10° MINI HI Dpr X-BARS 10° 40 29 116 FL-1002-10-29SD
10° MINI LO 10° 40 29 92 FL-1001-10-29
10° MINI LO Dpr X-BARS 10° 40 29 92 FL-1001-10-29SD
12 Degree Bends A B C D Part number
12° MOTO 12° 54 32 92 FL-1001-12-32
12° MOTO Dpr X-BARS 12° 54 32 92 FL-1001-12-32SD
12° ENDURO 12° 54 31 92 FL-1001-12-31
12° ENDURO Dpr X-BARS 12° 54 31 92 FL-1001-12-31SD
12° ENDURO HI 12° 54 31 116 FL-1003-12-31
12° MOTO HI 12° 54 32 116 FL-1003-12-32
12° MOTO HI Dpr X-BARS 12° 54 32 116 FL-1003-12-32SD
12° MINI HI 12° 54 29 116 FL-1002-12-29
12° Mini Hi Dpr X-BARS 12° 54 29 116 FL-1001-12-32SD
12° MINI LO 12° 54 29 92 FL-1001-12-29
12° MINI LO Dpr X-BARS 12° 54 29 92 FL-1001-12-29SD
14 Degree Bends A B C D Part Number
14° Moto 14° 57 32 92 FL-1001-14-32
14° Moto Dpr X-BARS 14° 57 32 92 FL-1001-14-32SD
14° Woods 14° 57 31 92 FL-1001-14-31
14° Woods Dpr X-BARS 14° 57 31 92 FL-1001-14-31SD
14° Quad Racer Lo 14° 57 31 92 FL-1001-14-31
14° Quad Racer 14° 57 31 116 FL-1003-14-31
14° Dbl Hi 14° 57 32 116 FL-1003-14-32
14° dbl Hi Dpr X-BARS 14° 57 32 116 FL-1003-14-32SD
14° MINI Hi 14° 57 29 116 FL-1003-14-29
14° MINI Hi Dpr X-BARS 14° 57 29 116 FL-1003-14-29SD
14° MINI LO 14° 57 29 92 FL-1001-14-29
14° MINI LO Dpr X-BARS 14° 57 29 92 FL-1001-14-29
15 Degree Bends A B C D Part Number
15° Moto 15° 62 32 92 FL-1001-15-32
15° Moto DPR X-BARS 15° 62 32 92 FL-1001-15-32
15° Woods SS 15° 62 31 92 FL-1001-15-31
15° Woods SS DPR X-BARS 15° 62 31 92 FL-1001-15-31SD
15° QUAD RACER LO 15° 62 31 92 FL-1001-15-31
15° QUAD RACER 15° 62 31 116 FL-1003-15-31
15° ADVENTURE 15° 62 32 116 FL-1003-15-32
15° ADVENTURE Dpr X-BARS 15° 62 32 116 FL-1003-15-32SD
15° MINI HI 15° 62 29 116 FL-1002-15-29
15° MINI HI DPR X-BARS 15° 62 29 116 FL-1002-15-29SD
15° MINI LO 15° 62 29 92 FL-1001-15-29
15° MINI LO DPR X-BARS 15° 62 29 92 FL-1001-15-29SD

   
KEY:

A = Degree of sweep
B = Sweep in millimeters
C = Width of handlebar in inches
D = Standard height in millimeters

(A&B are both pertaining to Sweep and are the same measurement, A is in degrees, B is in millimeters.)

   
NOTE:
  • DPR-XBARS = Crossbars which are arched to accomodate steering dampers
  • Damper crossbars allow for the over-the-bar installation of most steering dampers.
  • ** The ENDURO and QUAD bends have a 1” narrower mid section with full length handles allowing more room for equipment mounting.
  • All bars are shipped with silver bar pads
  • Damper crossbars can be added to any Flexx Handlebar System
 
Price: $359.95